Drying Procedure
The drying procedure operates as follows:
1. The printed image emerges from beneath the printer window and a vacuum holds it on the platen
of the
printer.
2. The front panel displays:
3. You can press the Cancel or the Form Feed & Cut key to cancel the drying time and release the paper.
4. After the drying time has elapsed:
For roll media the printer cuts the media and turns off the vacuum so the printed image can drop into the
printer bin.
For sheet media the vacuum is turned off and the printed image drops into the printer bin.
The countdown
timer indicates
how much
drying time
remains
To Next Page
Loading...