Printhead Replacement
The animation sequence shows how to replace a
printhead in the printer.
The front-panel menu selections are:
Click on the icon to run the animation
sequence. A printable version
of the sequence is also
available.
Once you have replaced the printhead, if you have
media loaded, the printer prompts you to start the
Printhead Alignment
procedure. If no media is loaded
the printer prompts you to load paper and then automatically starts the alignment. The alignment takes several
minutes to complete and then printer will then prompts you to run the Color Calibration
procedure.
Select (using the keys)
Then Press:
1. Ink Enter
2. Replace Printheads Enter
To Next Page
Loading...