front-panel error messages
Front-Panel Error Messages 33
Paper advance calibration is
recommended. Load paper
and select Paper advance
calibration.
Press ENTER to finish
You are recommended to perform the Advance calibration routine, to ensure the
optimum print quality.
Load a sheet or roll of paper and then select Advance calibration from the Paper
menu. See “Advance Calibration Routine” on page 22.
Paper advance calibration is
recommended.
Press ENTER to calibrate
You are recommended to perform the Advance calibration routine, to ensure the
optimum print quality.
Press the Enter key to create the calibration pattern. See “Advance Calibration
Routine” on page 22.
Paper loaded with too much
skew
Press ENTER to retry
Press CANCEL to abort
During the loading of paper, the printer has detected that the paper is skewed too
much, that is, it has not been loaded straight enough. (‘Skew’ is the angle between
the actual paper edge and the correct line.)
Either: Press the Enter key to restart the loading procedure;
Or: Press the Cancel key to cancel paper loading.
Message Explanation and Action
To Next Page
Loading...
