34 Front-Panel Error Messages
Paper mispositioned The paper is not properly positioned in the printer. Either it is out of the load line
margins or it has moved too much from its previous position.
Reload the paper following the normal procedure, to solve this problem. See “Loading
a Sheet of Paper” on page 47 and “Loading a Roll of Paper” on page 58 on the
reverse of this Pocket Guide.
Paper not found
Press ENTER to retry
Press CANCEL to abort
During the loading of paper, the printer has detected that no paper has been loaded.
Either: Press the Enter key to restart the loading procedure;
Or: Press the Cancel key to cancel paper loading.
Paper not present.
Load paper to print calibration
pattern
The paper axis calibration routine has been triggered with out having paper loaded.
Load paper; see “Advance Calibration Routine” on page 22 for details of the routine.
Message Explanation and Action
To Next Page
Loading...
