EasyManua.ls Logo

HP DesignJet 5500 - Page 133

HP DesignJet 5500
429 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
tell me about front-panel messages
Ink drying, please
wait
Printing has finished, but
the ink still needs some
time to dry.
To adjust the drying time
settings, see tell me
about drying time.
Ink tube maintenance
advised
The internal ink system
tubes need replacing.
The ink system tubes
have reached the end of
their useful life. Please
replace them before they
break and damage the
printer.
Ink tube maintenance
required now
The need to change the ink
tubes may affect the
performance of the printer.
The ink system tubes
have reached the end of
their useful life. Please
replace them before they
break and damage the
printer.
Insert There is no consumable
installed.
Insert the correct
printhead(s) into the
carriage assembly. Check
the interconnect to see if
they need cleaning. See
carriage interconnect
wiper.
Insert cleaner The printhead cleaners are
located on the right-hand
side of the printer.
Insert ink cartridges This is an ink cartridge
installation message.
For an animation showing
the cartridge install
procedure, see
how do I
install ink cartridges?
Insert printhead This message is prompting
you to insert a printhead
into the carriage assembly.
See
how do I install
printheads?
Lift window to remove
printheads
You have selected Replace
Printhead and the front
panel is guiding you
through the procedure.
For an animation of the
printhead installing
procedure, see
how do I
install printheads?
Lift window to replace
SETUP printheads
The printer is prompting
you to lift its window so
that you can install
`normal' printheads. You
must remove the setup
printheads only after you
have initialized the printer.
It is vital to the correct
functioning of your
printer that the setup
procedure is performed
correctly. Use the Setup
Instructions that came
with your printer to guide
you through the steps.
Media loaded
incorrectly. Remove
media.
The printing material is mis-
positioned or mis-aligned.
Before the printer can
continue, you must
remove the printing
material and reload it
correctly. See
loading
rolls into the printer.
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0151.htm (3 of 8) [8/5/2002 4:23:08 PM]

Other manuals for HP DesignJet 5500

Related product manuals