System error
XXXXXX
Switch off/on
If problem persists
contact HP support
The printer has
experienced an unusual
error; it may disappear if
you switch off and then on
again.
Switch off the printer
using the power switch
located at the rear. Then
switch on again. See
switching your printer on
and off.
This media type
supports Production
PQ level.
Press Enter to
continue.
You may use the
Production print mode with
this printing material.
If you want to use the
Production print mode,
you can select it from
your printer driver, from
WebAccess, or from the
front panel.
Waiting for nest The printer is in the
process of nesting.
See
tell me about nesting
pages.
Warning! Ink
cartridges are still
functional. If you
want to replace any,
please select YES
The printer's ink cartridges
are working correctly. You
should remove them only if
you are printing a large
image unattended and
there is insufficient ink
remaining to finish the
image.
See
how do I remove ink
cartridges?
Warning! ... supply
ink level? (Error code
8x09) See user
manual.
If you choose to continue
printing with this ink
supply you will not have an
ink level indicator. You
may not know when the
ink supply is running low or
empty. Printing with an
empty ink supply may
seriously damage your
printhead, ink tubes, and
printer. See below for a
complete listing of features
that will not be available
with continued use of this
ink supply. Any damage
resulting from use of this
supply or non-Hewlett-
Packard ink is not covered
under your printer
warranty.
The following features will
not be available as a result
of using this supply.
In the Ink Cartridge menu:
● Ink level indicator
● Percentage of ink
remaining
In WebAccess:
● Ink Cartridges status
Select Yes to replace it
with a genuine HP No.
81/83 cartridge, No to
continue. For an
animation of the
cartridge removal
procedure, see
how do I
remove ink cartridges?
See also
ordering ink
supplies.
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0151.htm (7 of 8) [8/5/2002 4:23:08 PM]
To Next Page
Loading...