the problem is reseating
the printhead
hp designjet
5500 series
welcome
how do I ...
tell me about ...
the problem is ...
legal notices
glossary
index
If you have inserted the printhead into the printhead carriage assembly and
the printer does not beep, perform the following steps.
● Check that you have removed the protective tape from the printhead.
● Insert the printhead into the carriage assembly but this time close the
cover using the latch.
● Clean the electrical contacts on both the printheads and the printhead
carriage assembly using the carriage interconnect wiper.
● Replace the printhead with a new one.
© 2002 hewlett-packard company
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0095a.htm [8/5/2002 3:29:42 PM]
To Next Page
Loading...