HP DesignJet 5500 - Page 322

the problem is inserting the printhead
the problem is inserting
the printhead
hp designjet
5500 series
welcome
how do I ...
tell me about ...
the problem is ...
legal notices
glossary
index
Do not touch, wipe or attempt to clean the printhead nozzles. This can
damage the printhead and reduce print quality.
After waiting a few moments to allow both connectors to dry, replace the
printhead into the carriage assembly. See
how do I install printheads?.
1. Ensure that you have the correct HP No. 81 or HP No. 83 printhead.
2. Ensure that you have removed the protective cap from the printhead.
3. Ensure that the printhead is the correct color for that slot.
4. Ensure that the printhead is the correct orientation.
5. If the front panel persistently displays the message RESEAT next to the
printhead, try performing the procedure shown in
how do I install
printheads?
See also:
how do I maintain my printer?
© 2002 hewlett-packard company
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0095c.htm [8/5/2002 3:29:42 PM]