prints do not stack
properly in the bin
hp designjet
5500 series
welcome
how do I ...
tell me about ...
the problem is ...
legal notices
glossary
index
● The printer may be too close to the end of the roll. The natural curl
near the end of the roll can cause stacking problems. Load a new roll or
remove prints manually as they are completed.
● If you are mixing prints or nesting sets of several different sizes, you
may have stacking problems because of the different sizes of printing
materials in the bin.
© 2002 hewlett-packard company
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0103b.htm [8/5/2002 3:36:26 PM]
To Next Page
Loading...