HP Designjet L25500 Series - Embedded Web Server setup options

HP Designjet L25500 printer series Add New Substrate and Image Quality Troubleshooting
Hewlett-Packard 16
Temperature profile
Many of the main and advanced substrate settings are related to temperature control, since this is a critical
area for correct printing results with latex inks on a wide variety of substrates. The diagram below
graphically represents the evolution of drying and curing temperatures during the various printing phases.
Note 1: Target temperatures and time are not to scale. For the specific values used for a given substrate
type (family), consult the main and advanced settings tables above.
Note 2: Standby time can be modified through the printer’s front panel, from firmware version 3.x
onwards.
time
(not to scale)
target temperature
(not to scale)
idle
prepare
print
warm
up
printing
cool
down
standby
idle
drying
curing
t
a
t
p
t
d
+t
wdo
t
ic
+t
wco
t
d
t
cd
+t
cdo
t
p
t
a
t
c
t
cc
+t
cco
t
a
ambient (~25 °C/77 °F)
t
p
prepare (45 °C / 113 °F)
t
d
drying
t
wdo
warmup drying offset
t
cd
cooldown drying
t
cdo
cooldown drying offset
t
c
curing
t
ic
internal curing
t
wco
warmup curing offset
t
cc
cooldown curing
t
cco
cooldown curing offset