Remove a printhead
1. On the printer's front panel, select the
icon, and then select Replace printheads.
2. The carriage moves to the removal position.
CAUTION: If the carriage remains in the removal position for more than 3 minutes without
inserting or removing any printheads, it will attempt to return back to its home position to the right.
3. When the carriage has stopped moving, the front panel prompts you to open the printer window.
Unlock the window and open it.
4. Locate the carriage on the right side of the printer.
ENWW Work with ink system components 57
Handle the ink system
To Next Page
Loading...
