HP DesignJet Series - Page 183

7-51
Removal and Installation
HP Designjet Ultra Low End Printer Service Manual
Spittoon (If Installed in the Printer)
(Not applicable to 10ps, 20ps, 30, 30n, 50ps)
Removal
Switch off the product and remove the power cable.
1. Remove the Center Cover
⇒ Page 7-7.
2. Remove the Left End Cover ⇒ Page 7-11.
3. Remove the Starwheel Assembly ⇒ Page 7-
43.
4. Remove 1 T-10 screw that secures the
Spittoon.
5. Remove the Spittoon from the Printer.