3-25
System Maintenance Utility
HP Designjet Ultra Low End Printer Service Manual
Update Firmware
Update firmware updates the built-in software of the printer. The update
process will check the printer's version with the latest version available from
HP. Before trying this utility, first make sure that you have an internet
connection.
Do not power off the printer during this operation. The printer
di
s
play will indicate busy until the operation is finished.
The first step will be to check if newer printer software is available. If newer
so
ftware is available, then follow the instructions in the window in order to
upgrade the printer software.
Step 2 - Click on this link
If newer printer software is not available, then this message will be displayed
Step 1 - Select "advanced functions"
and then "update firmware"
If you do not have Internet access, you can still send a new firmware file
(which you have received on CD from HP) from your computer to the Printer.
To Next Page
Loading...