HP DesignJet Series - Page 68

3-26
System Maintenance Utility
HP Designjet Ultra Low End Printer Service Manual
Reset Jetdirect Network Card
Use this function to reset the HP Jetdirect Network card configuration to the
factory defaults. This should only be used if the HP Jetdirect Network card is
not responding and no other recovery method works.
Any user configuration information, for example the IP address, will be lost.
In this c
a
se the system maintenance utility will not be able to communicate
with the printer using the network.
The HP Jetdirect Network card will need to be reconfigured, using
W
e
bJetAdmin for example, after this reset.
Step 2 - Press "reset jetdirect network card"
Step 1 - Select "advanced functions"
and then "reset jetdirect
network card"