Service Tests and Utilities
3-52 HP Designjet T Series — Service Manual
2 The Front Panel will show the 13. Error 71:19 Recovery submenu.
3 In the 13. Error 71:19 Recovery submenu, scroll to Set Serial
Number and press OK to start the test.
4 The Set Serial Number test starts and the front Panel displays the following
me
ssages:
Checking SE Log.
Starting Horsburgh & Mips.
Starting NvmBackup.
Starting NvmMain
Getting Serial Number
Checking Serial Number.
Starting Nvm.
Getting Part Number.
5 The Front Panel prompts you to enter the Serial Number.
6 Use the UP, DOWN and BACK keys to select each character of the Serial
Number and use the OK to confirm.
7 Once you have entered and confirmed the Serial Number, the Front Panel
pr
ompts you to confirm your selection a second time.
8 If the new Serial Number is correct, press OK. If it is NOT correct, press
BACK to change the Serial Number.
To Next Page
Loading...