Using the front panel
The front panel is a touch-sensitive screen with a graphical user interface; it is located on the front left of
the printer. It gives you complete control of your printer: from the front panel, you can print, view
information about the printer, change printer settings, perform calibrations and tests, and so on. The
front panel also displays alerts (warning and error messages) when needed.
The front panel has a large central area to display dynamic information and icons. On the left and right
sides you can see up to six fixed icons at different times. Normally they are not all displayed at the
same time.
To the right of the front panel is the Power key, with which you can turn the printer on or off. The key is
illuminated when the printer is on. It flashes when the printer is in transition between on and off.
Left and right fixed icons
●
shows the status of the wireless connection: if the blue light is shining, the wireless connection is
active.
●
Press
to return to the home screen.
●
Press
to view help about the current screen.
●
Press
to go to the previous item.
●
Press
to go to the next item.
●
Press
to go back to the previous screen.
●
Press
to cancel the current process.
Home screen dynamic icons
The following items are displayed only on the home screen.
●
At the top left of the home screen is a message telling you which paper source is active.
●
Press
to view Web Services status and display your printers email address.
●
Press
to view connectivity status information and to perform network configuration. If a network
cable is connected,
is displayed instead.
NOTE: It is not possible to use wireless and wired network connections simultaneously.
●
Press
to view ink information.
2 Chapter 1 Printer fundamentals ENWW
To Next Page
Loading...