HP Designjet T2300 Using

Safety precautions
The following precautions ensure the proper use of the product and prevent the product from being
damaged. Follow these precautions at all times.
●
Use the power supply voltage specified on the label. Avoid overloading the product's electrical
outlet with multiple devices.
●
Ensure the product is well-grounded. Failure to ground the product may result in electrical shock,
fire and susceptibility to electromagnetic interference.
●
Do not disassemble or repair the product yourself. Contact your local HP Service Representative
for service, see
Contact HP Support on page 191.
●
Use only the electrical cord supplied by HP with the product. Do not damage, cut or repair the
power cord. A damaged power cord has risk of fire and electric shock. Replace a damaged
power cord with an HP-approved power cord.
●
Do not allow metal or liquids (except those used in HP Cleaning Kits) to touch the internal parts of
the product. Doing so may cause fire, electric shock or other serious hazards.
●
Turn off the product and unplug the power cable from the power outlet in any of the following
cases:
◦
When placing your hands inside the product
◦
If there is smoke or an unusual smell coming from the product
◦
If the product is making an unusual noise not heard during normal operation
◦
A piece of metal or a liquid (not part of cleaning and maintenance routines) touches internal
parts of the product
◦
During a thunderstorm
◦
During a power failure
Product models
This guide covers the following product models, normally referring to them by their short names for
brevity.
Full name Short name Part number
HP Designjet T2300 eMFP T2300 CN727A
HP Designjet T2300 PostScript® eMFP T2300 PS CN728A
HP Start-up Kit
The HP Start-up Kit is the DVD that comes with your product; it contains the product's software and
documentation.
Using this guide
This guide can be downloaded from the HP Knowledge Center (see Knowledge Center on page 189).
2 Chapter 1 Introduction ENWW
Introduction

HP Designjet T2300 Specifications

General

Coated paper	Yes
Maximum scan size	914 x 2378 mm
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Printing colors	Cyan, Magenta, Matte black, Photo black, Yellow
Maximum resolution	2400 x 1200 DPI
Print head nozzles	1056
Number of print cartridges	6
Storage media	HDD
Built-in processor	Intel® Pentium® M
Internal storage capacity	160 GB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Scan file formats	TIFF
Hardware scan resolution	600 x 600 DPI
Copier resize	25 - 400 %
Maximum number of copies	99 copies
Sustainability certificates	ENERGY STAR
Package weight	135 g
Media thickness	0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	91 m m
Maximum roll diameter	135 mm
Recommended media weight	60 - 328 g/m²
ISO A-series sizes (A0...A9)	A0, A1, A2, A3, A4
Power consumption (standby)	41 W
Power consumption (typical)	120 W

Weight and Dimensions

Dimensions (WxDxH)	1771 x 1010 x 1124 mm