NOTE - Your image must be a JPG, PDF, or TIFF file. If your file is not
supported, you must go back and export your image as one of the accepted
file types.
In “General Print Settings” at the top right corner, click the drop down menu
under “Paper” and select “Roll, 24 in”.
In the “Fit to” drop down menu, select “Roll”
In the “Print Quality” setting, select “Normal”. Selecting “Draft” or “Best”
will adjust your print time and quality.
NOTE - You must have a high resolution image to reduce the possibility of
pixelation
In the“Printable Area Settings” menu you may change the orientation of
your image by selecting any one of the four options in the menu
Page 13 of 14
To Next Page
Loading...