8. When the printer is ready, the front panel prompts you to use the Up/Down keys to move the
carriage until the right-hand edge of the left alignment mark on the Carriage Cover is correctly
aligned with the Primer Positioning Indicator. When the carriage is correctly aligned, press OK.
TIP: To see the exact position while aligning the Carriage to the Primer, it is a good idea to
press down lightly on the Primer while you are moving the Carriage.
While the Carriage is moving, the front panel shows the actual position and the direction of
movement and prompts you to press OK when done.
136 Chapter 6 Service calibrations ENWW
To Next Page
Loading...