Power
amber
LED
Power
blue
LED
Power
green
LED
Formatter
I LED
Formatter
II LED
Formatter
III LED
Front
panel
status
Problem and recommendations
Off On Off Off Off Off Off There is a power failure in the
Formatter.
1. Reseat the power connector in the
Formatter.
2. Replace the Main PCA.
3. If the problem persists, replace the
Formatter.
4. If the problem persists, replace the
Power Supply Unit.
Off On Off On Off Off Off The Formatter BIOS is unable to start.
If an external Memory Module is
installed:
1. Reseat the Memory Module.
2. Remove the Memory Module and
restart the printer.
3. If the printer is able to start
normally, replace the Memory
Module. If not, replace the
Formatter.
If an external Memory Module is not
installed, replace the Formatter.
Off On Off Flashing Off Off Off The Formatter BIOS cannot detect the
Hard Disk Drive.
1. Reseat the Hard Disk Drive
connectors.
2. Replace the Hard Disk Drive.
Off On Off On Flashing Off Off The operating system has experienced a
fatal error. Replace the Hard Disk Drive.
Off On Off On On Off Off There is a communication failure with
the Main PCA.
1. Reseat the Main PCA.
2. Replace the Main PCA.
Off On Off On On Flashing Off There is an initialization failure in the
Formatter. Replace the Formatter.
Off On Off On On On Off There is an initialization failure in the
Front Panel.
1. Reseat the Front Panel cable.
2. Replace the Front Panel.
18 Chapter 2 Troubleshooting ENWW
To Next Page
Loading...