HP DESIGNJET T7100 Monochrome Series

Smart Roll-loading System Damper
Removal
1. Remove the Left Smart Roll-loading System Cover
See Smart Roll-loading System Cover, Left
on page 259.
2. Remove the Right Smart Roll-loading System Cover
See Smart Roll-loading System Cover, Right
on page 258.
3. Open the Smart Roll-loading System Door.
4. Remove the Smart Roll-loading System Damper from both sides.
Smart Roll-loading System Door Switch
Removal
1. Remove the Left Smart Roll-loading System Cover
See Smart Roll-loading System Cover, Left
on page 259.
2. Remove the Right Smart Roll-loading System Cover
See Smart Roll-loading System Cover, Right
on page 258.
3. Open the Smart Roll-loading System Door.
4. Disconnect the Smart Roll-loading System Door Switch cable.
ENWW
Disassembly order
277