7. Remove the Smart Roll-loading System Door.
Carriage
Removal
WARNING! Switch off the printer and remove the power cable.
1. Remove the Right Cover See Cover, Right on page 224.
2. Remove the Front Panel
See Front Panel on page 237.
3. Remove the Primer Assembly
See Primer Assembly on page 239.
4. Remove the Left Cover
See Cover, Left on page 227.
5. Remove the Encoder Strip
See Encoder Strip and Encoder Sensor on page 294.
6. Pull out the Printhead Maintenance Cartridge tray.
ENWW
Disassembly order
283
To Next Page
Loading...