Drive Roller
Removal
WARNING! Switch off the printer and remove the power cable.
1. Remove the Right Cover See Cover, Right on page 224.
2. Remove the Left Cover
See Cover, Left on page 227.
3. Remove the Right Connector Cover
See Connector Cover, Right on page 236.
4. Remove the Left Connector Cover
See Connector Cover, Left on page 237.
5. Remove the Service Station
See Service Station on page 244.
6. Remove the Ink Supply Station
See Ink Supply Station (ISS) on page 310.
7. Remove the Media-Axis Motor
See Media-Axis Motor on page 325.
8. Remove the Encoder Disc and Sensor
See Encoder Disc and Sensor on page 400.
408 Chapter 9 Printer part removal and installation ENWW
To Next Page
Loading...