Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that
printhead with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.3:01
Cause: The Magenta/Cyan Printhead (T7100) or Dark Gray Printhead (T7100 Monochrome) in slot 3
is deteriorating
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that
printhead with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.4:01
Cause: The Magenta/Cyan Printhead (T7100) or Dark Gray Printhead (T7100 Monochrome) in slot 4
is deteriorating
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that
printhead with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.5:01
Cause: The Matte Black Printhead (T7100) in slot 5 is deteriorating; the T7100 Monochrome should
not experience this error
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that
printhead with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.6:01
Cause: The Matte Black Printhead (T7100) in slot 6 is deteriorating; the T7100 Monochrome should
not experience this error
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that
printhead with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.7:01
Cause: The Gray/Dark Gray Printhead (T7100) in slot 7 is deteriorating; the T7100 Monochrome
should not experience this error
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that
printhead with a new one.
ENWW
Continuable and non-continuable error codes
55