The binary number needs to be read from right to left so that the 1
st
bit corresponds to the right one of
the binary number. For example, the error code 4099 is converted to binary number
10000000000011. So using the table above, the error code means “FAILS_LOGICAL_V”,
“FAILS_CONTINUITY” and “MISMATCH”.
Carriage Interconnect Wiper
Whenever you replace the Printhead, check the empty slots to see if they need cleaning. In extreme
circumstances, when a Printhead is inserted, it is possible that the printer will not recognize it due to the
build-up of ink on the electrical connection between the Printhead and the Carriage Assembly.
The Carriage Interconnect Wiper is available as an accessory in a separate package. The package
also contains replacement sponges and an instruction sheet. This tool should be used for cleaning the
electrical interconnects of both the Carriage Assembly and the Printhead.
If the front panel displays the message Reseat or Replace next to the offending printhead, try
cleaning the flex circuits of the Carriage and the Printheads.
CAUTION: Do not touch, wipe or attempt to clean the printhead nozzles. This can damage the
printhead and reduce print quality.
Warranty information for ink supplies
●
Ink Cartridge
●
Printheads
Ink Cartridge
The warranty for an Ink Cartridge ends when one of the following occurs:
●
30 months have passed since the date of manufacture.
or
●
The Ink Cartridge has supplied all the ink that it is advertised as containing.
or
●
The customer confirms that non-HP ink has been used in empty override mode.
The actual end of warranty date is printed on the supply label.
ENWW
Carriage Interconnect Wiper
87
To Next Page
Loading...