HP DesignJet T770 Series - Page 8

Ön Paneli Kullanmak
HP Designjet T1200 serileri HP Designjet T770 serileri
Ön panel aaõdaki bileenleri, dört dorudan eriim tularõ ile balar:
1. Mürekkep Düzeylerini Görmek
2. Bilgi tuunu görüntüle. By pressing this key repeatedly, you can see information about all loaded
papers (roll 1, roll 2, sheet) and about the printer's connection to the computer.
3. Yazmayõ durdurma tuu(T1200 için)pauses printing after finishing the current page. Press the key
again to restart printing. This can be useful, for instance, when you want to change or load a roll.
Kaõt Çõkarma Tuu(T770için)Kaõt tuu (T770 serisi) u anda yüklü kaõdõ (rulo veya tabaka) kaldõrõr.
4. Form besleme ve kesme tuu.
5. Ön panel ekranõ - hatalarõ görüntüler, uyarõlar ve yazõcõnõzõn kullananõmõ hakkõnda bilgi.
6. Geri Tuu - To go to the previous step in a procedure or interaction. To go to the upper level, or
leave the option in the menu, or when given an option.
7. MenuTuu - Press to return to the main menu of the front-panel display. If you are already on the
main menu it will display the status screen.
8. Aaõ Tuu- To go down in a menu or option, or to decrease a value, for example when configuring
the front-panel display contrast or the IP address.
9. Güç Tuu,Basõnca açar veya kapar. it also has a light to indicate the printer's status. If the
power key light is off the printer is off. If the power key light is blinking green, the printer is starting
up. If the power key light is green on, the printer is on. If the power key light is amber on, the printer
is in standby. If the power key light is blinking amber, the printer needs attention.
10. ptal tuu - Bir ilem veya etkileimi durdurmak için.
11. Yukarõ tuu go up in a menu or option, or to increase a value, for example when configuring the
front-panel display contrast or the IP address.
12. OK tuu confirm an action while in a procedure or interaction. To enter in a submenu in the
menu. To select a value when given an option. If the status screen is displayed, this key takes you
to the main menu.
13. Durum õõõ - Yazõcõnõn durumunu gösterir. õ megul. Katõ sarõysa, bir sistem hatasõ vardõr.
Troubleshooting