5. In the Paper/Quality tab, check the Show preview before printing box, and select the paper type
that you intend to use.
NOTE: If you select neither the paper source nor the paper type, the printer will not print on any
protected roll (see
Roll protection (T1200 series only)on page 66).
6. Select the print quality (your own choice between speed and quality of printing).
7. If you intend to print on roll paper, you must decide where the printer should cut the paper. Press
the Margins/Layout button and select Clip contents by margins.
8. If you are using photo or glossy paper, you can select Borderless printing (T1200 series only).
96 Chapter 9 Practical printing examples ENWW
Printing examples
To Next Page
Loading...
