If you still have a problem
If you still experience print-quality problems after applying the advice in this chapter, here are some
further things that you can do:
●
Try using a higher print-quality option. See
Printing on page 53.
●
Check the driver you are using to print with. If it is a non-HP driver, consult the driver vendor about
the problem. You could also try using the correct HP driver, if feasible. The latest HP drivers can
be downloaded from
http://www.hp.com/go/T770/drivers/ or http://www.hp.com/go/T1200/
drivers/.
●
If you are using a non-HP RIP, its settings may be incorrect. See the documentation that came with
the RIP.
●
Check that your printer's firmware is up to date. See
Update the firmware on page 131.
●
Check that you have the right settings in your software application.
170 Chapter 16 Troubleshooting print-quality issues ENWW
Print-quality issues
To Next Page
Loading...
