HP Designjet T920

Firmware upgrades
●
How to upgrade
●
Embedded web server
●
USB upgrade
How to upgrade
To obtain the latest firmware, please check http://www.hp.com/go/T790/firmware, or
http://www.hp.com/go/T1500/firmware, or http://www.hp.com/go/T2500/firmware, or www.hp.com/go/
T3500/firmware
There are 3 ways of updating the firmware in the printer:
●
Automatic firmware upgrade if web services are enabled
●
Embedded web server. See users guide
●
Using a USB key
Embedded web server
Once the file is downloaded open the EWS with any web browser and go to “Maintenance” – Upgrade
Firmware”
USB upgrade
1. Upload the fmw file onto an empty USB stick.
2. Turn off the printer.
3. Plug in the USB stick.
4. Turn on the printer and follow instructions.
100 Chapter 2 Troubleshooting ENWW