Printing in color
You can adjust the colors of your print in similar ways under Windows and Mac OS:
●
In the Windows driver dialog: select the Color tab, ensure that the Advanced Color
Adjustments box is checked, then press the Settings button beside it.
●
In the Mac OS Print dialog: select the Paper Type/Quality panel, then Lightness and Hue.
Under either operating system, you will then be able to make adjustments using a lightness slider and
three color sliders.
●
The lightness slider simply makes the whole print lighter or darker.
●
The color sliders can be used to fade or emphasize each of the primary colors in the print. The
primary colors may be red, green, and blue; or cyan, magenta, and yellow; depending on the color
model used in the image.
The Reset button restores each slider to its default central position.
Printing in grayscale
You can adjust the gray balance of your print in similar ways under Windows and Mac OS:
●
In the Windows driver dialog: select the Color tab, ensure that the Advanced Color
Adjustments box is checked, then press the Settings button beside it.
●
In the Mac OS Print dialog: select the Paper Type/Quality panel, then Gray balance.
Under either operating system, you will then be able to make adjustments using separate controls for
highlights, midtones, and shadows.
ENWW Color adjustment options 63
Color management
To Next Page
Loading...
