how do replace glass plate
djcc-96a.htm[28/10/2014 15:48:45]
down until the glass plate rests in the scanner lid between the
2 grooves (top/bottom position grooves).
7. Lock the new glass plate in place
The glass needs to be locked in place with the two latches. At
this point, the latches are under the glass plate and they need
to be brought above so they grip the glass plate’s edge.
a. Start at the right side.
b. Press down on the first (rightmost) latch release button.
c. With your other hand, press down on the glass plate near the
latch so the glass plate’s edge snaps down under the latch.
d. Repeat the process with the other latch.
f. Ensure that both latches are gripping the glass plate’s edges.
8. Clean the new glass plate
To Next Page
Loading...
