how do replace glass plate
djcc-96a.htm[28/10/2014 15:48:45]
Make sure you use 2 fresh and clean lint-free cloths for
cleaning your new glass plate.
a. Spray/apply a mild, streak-free, glass cleaner onto a lint-free
cloth.
b. Gently wipe the glass clean. Look for fingerprints and
smudges that may have been applied to the glass during
replacement.
c. Dry the glass completely using the other clean, dry lint-free
cloth.
d. Make sure that fluids to not get under the glass and that you
leave the area dry.
CAUTION: Do not spray/apply cleaner fluids directly on the
glass plate or anywhere else in the scan area.
e. When done, close the lid gently until you hear the lid locks
click.
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
