how do I create data files for support and debugging
djcc-114.htm[28/10/2014 15:48:49]
from another computer" for instructions.
to create a print output data file ...
1. Press Setup Tab > Options > System > Advanced
2. Enter the Administrator password if prompted by the system.
3. Press the Print to File button. This tells the program to send
printer data to a file rather than to the printer the when you
print.
4. Printer data is saved to the file D:\Images\print.prn.
5. You may need to move the file print.prn to another computer
for processing/sending: The panel PC's D:\Images folder can be
accessed from other computers through its IP. See "how do I
access shared files from another computer" for instructions.
to create a screen image file ...
1. Press Setup Tab > Options > System > Advanced
2. Enter the Administrator password if prompted by the system.
3. Press the Print Screen button.
4. You can activate a PrnScn button on the upper corner of you
screen, to make continious scren snapshots.
5. Screen images are saved to the folder D:\Images\
6. You may need to move the files to another computer for
processing/sending: The panel PC's D:\Images folder can be
accessed from other computers through its IP. See "how do I
access shared files from another computer" for instructions.
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
