HP Designjet - How do I Enable Storage of Network Connections?; Storing Network Connection Definitions

how do I enable storage of network connections ?
djcc-113.htm[28/10/2014 15:50:00]
you are here: welcome how do I...? enable storage of network connections
HP Designjet Scanner
how do I...?
the problem is...
alphabetical index
how do I enable storage of network connections?
The system can be setup so users can store network connection
definitions (username/password pairs) so that these are
reestablished every time the system is restarted.
Enabling users to store network connections is an adminstrator
function. If the Administrator password has been setup and
activated, you will be prompted to enter it before you can apply this
function.
to enable storage of network connections ...
1. Press Setup Tab > Options
2. Select System
3. Press the Advanced button.
4. Enter the Administrator password if prompted by the system.
5. Press the Store Network Connections button.
6. Select the "Store network connection" option box and press OK.
7. With the "Store network connection" option box selected, the
system will then make visible (otherwise hidden) a "Reconnect
at logon" option on the dialog. To access the option:
Select Folder button > Network > Add Network
Connections. The dialog and the "Reconnect at logon" option
with network connections is described in the topic how do I
scan to and access a network folder?.
8. Stored connections that fail (for example due to changes on the
network) can be removed manually through the Folder button -
> Network -> "Remove Network Connection".
NOTE: Storing usernames and passwords on the system can pose
security risks.
printing instructions legal information
© 2002-2014 Hewlett-Packard Company