the problem is a cropped image
djcc-32.htm[28/10/2014 15:50:08]
you are here: welcome the problem is... the image is cropped
HP Designjet Scanner
how do I...?
the problem is...
alphabetical index
the problem is the image is cropped
if your image is cropped...
If your image is cropped and no error message was displayed check
one or both of the following possibilities:
Make sure that you have set the correct media width for your
printer device in the copy system software.
...how do I set the printer media width? and your printer’s
documentation for instructions.
You may have set Margins in the Setup Tab -> Margins dialog. The
system will crop the image with the size of the margins defined.
Set these to zero if you do not want cropping and use the option
“Outer Margins to add margins to the output without cropping.
Note that "outer margins" will be added to the set output size
and thus expand the end result.
See: ...how do I set the Output margins? for instructions.
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
