how do I set the output quality?
djcc-77.htm[28/10/2014 15:45:15]
Ink Printer Original: will improve the result of your copy or print if
the original to be scanned has been printed with an inkjet
printer. Press OK button to apply.
3. Press the Copy tab > Quality button.
Define a new quality based on both print and scan quality as
described below.
Scan Quality
For the scanner you set scan resolution in dpi (dots per
inch).
To use Auto, you check the Auto field and then
choose one of the Print Quality settings. The
program will determine a Scan Quality
setting based on, and best for the Print
Quality setting you choose (Fast, Normal or
Best). The automatically selected dpi value is
displayed near the field (200 dpi in example
below).
Uncheck Auto to set your own dpi value.
Descreen tells the scanner to scan with the
scanner’s optical resolution and relay the
data to the software without interpolation.
Optimal conversion to the set dpi or quality is
then performed by the software. Gives
superior results with raster originals.
Scanning speed is reduced.
Turbo: You set the Scan resolution value or Auto
and then select Turbo. This will basically
double the scanning speed but with a
reduction on image quality. Turbo resolution
processing involves speeding up the paper’s
movement, reduction of captured scan data
in the scan direction and resampling to create
To Next Page
Loading...
