how do I set the output quality?
djcc-77.htm[28/10/2014 15:45:15]
the image resolution as set in Scan
Resolution or Auto options. Turbo mode has
no effect for resolutions below 300 dpi.
Print Quality
You select Fast, Normal or Best settings.
If you selected Auto for Scan Quality, your Print
Quality setting will determine the Scan Quality as
described above.
Press OK button to apply.
Print quality
With printing from an existing
file in the print tab, you set print
(output) quality options.
1. Press the Print tab.
2. Press the Settings button.
To Next Page
Loading...
