how do I set the output quality?
djcc-77.htm[28/10/2014 15:45:15]
Press the Print Quality button to choose a fast, normal or
best output quality setting.
Ink Printer Original: to improve the result of your copy or
print if the original that was scanned to create the file had
been printed with an inkjet printer.
Black Ink Only: This option will only affect printed output
from graytone image files. For creating true and neutral
graytone output. Creating graytones with black ink only
will create printouts that are less sensitive to current
lighting conditions when viewing the results. Note that
setting Black ink Only can create output that is more
grainy than normal graytone output where color ink is
also used.
Optimize for drawing: Recommended with text and
drawings. Tells the printer to output optimally in relation
to clear and sharp edges. Not advisable to use with
pictures as visible bands can be created on the output.
Max detail: For enhancing detailed graphics. Recommended
for originals with many small details such as maps and
certain CAD drawings. Not recommended with pictures as
the setting will have a negative effect on color matching
and graytone output.
Press OK button to apply.
NOTE: The availability of of these options depend on the printer
model.
NOTE: Some of these special print quality options can also be defined
within a type of original template through the copy tab. See: how do I
define an original template? for more information.
Scan quality
With scan-to-file in the Scan tab, you set scan (input) quality
factors. You can however tell the program to find the best scan
quality based on a print quality you intend to apply when you
print the file.
To Next Page
Loading...
