how do I set the printer media width?
djcc-66.htm[28/10/2014 15:45:16]
3. Select the Advanced button. The current Media width setting
(value) is displayed on the Media width button.
Setting the paper media width on printers WITH support for
automatic media width detection...
1. At start up - The program will automatically detect the width of
the roll currently loaded on the printer. The value will be
displayed in the Media width button in the Setup
tab>Printer>Tool button>Advanced dialog.
2. If you change the paper roll to one of another width - After
changing the roll, access the Setup tab>Printer>Tool
button>Advanced dialog. Press the Auto detect button to
retreive the new media width value from the printer. The new
value will be displayed in the Media width button.
3. Select OK to finish.
To Next Page
Loading...
