how do I scan to a file?
djcc-15.htm[28/10/2014 15:47:19]
Automatic file naming elements - To enter an element,
position your screen cursor in the name field and press the
element insert button. You can use the following automatic file
naming elements:
Counter <###>- increasing number series. Press the Insert
Counter button to add a counter to the file name. You can add
"#" chracters in the brackets. The number of “#” characters
defines the minimum number of digits that will be used. The
system will always examine the destination folder and start
numbering after the latest file name to avoid overwriting any
files already there. The system will add digits if necessary.
Example: if you enter as a file name: dogimage<###> the
system, for each scan, will create files dogimage001,
dogimage002… dogimage999… dogimage1000… and so on.
You can also enter an exact counter number to begin saving
files with a specific name - resuming the series from that point
forward.
Example: if you enter as a file name: dogimage<015> the
system, will begin to create files dogimage015, dogimage016,
dogimage017… and so on.
Date <DATE>- The current date string in yyyymmdd format.
Press the Insert Date button to add the current date to the file
name.
Time <TIME> - The current time string in hhmmss format. Press
the Insert Time button to add the current time to the file name.
An example of the next expected file name will be displayed
under the file name edit field so you can control your file name
settings.
Automatic file naming can be used with single file scanning but
is especially useful with batch scanning.
9. To modify the output file format, press File name > File
Format. Various options are available for each format.
10. To modify the Folder group, press the File destination button.
To Next Page
Loading...
