how do I scan to network folder
djcc-99.htm[28/10/2014 15:47:21]
you are here: welcome how do I...? scan to and access a network folder
HP Designjet Scanner
how do I...?
the problem is...
alphabetical index
how do I scan to and access a network folder?
Per default, your system’s folder browse dialogs will display only
local drives and folders. This topic explains how you can add network
locations to the system. Once added, you can use a network location
and underlying folders as destinations for scan-to-file (Scan tab)
jobs and access them with the file manager (folder button).
To add/store/remove a network connection
1. Your system must be connected to the network.
2. Press the folder button to open the file manager dialog.
3. Press the "Network" button.
4. Press the Add Network Connection button to open the dialog
shown below. Contact your network administrator if you need
information about one or more of the dialogs settings as
described in the next steps.
5. Network Folder – enter the full path name to the location on the
network. This can be a server name, an IP address or any name
that is recognized by the network and identifies a valid
connection/location.
6. User name – the login user name for the network server/
machine. If your your machine is on a network Domain, then
you need to write the combination:
<domain name>\<user> in the field. Example:
"MAINOFFICE\John".
To Next Page
Loading...
