how do I scan to network folder
djcc-99.htm[28/10/2014 15:47:21]
7. Password - the login password for the network server/
machine.
8. Label – this is what your HP Designjet scanner system will
display in its browse dialogs. Enter a name that will help you
identify the network destination.
9. Inactivity timeout – This feature enables you to set an individual
timeout value (in minutes) for your network connections, for
added security.
NOTE: "If timeout value is set to 0 (Infinite) then the network
connection will never time out. See more in: How does the
Inactivity timeout for a network connection work?
10. Reconnect at logon – If this is left unchecked, your network
connection definition will automatically be deleted when you
shut down the panel PC. Select this option to tell the system to
store the connection and activate it every time you start up the
system.
NOTE: "Reconnect at logon" is a user feature. The option will
only be visible if it is enabled by the system's adminstrator. See
more in: How do I enable storing of network connections?
NOTE: You can add as many network connections as you need.
However, system will not allow 2 or more network connections on
the same server with different users. Example:
If user "John" has created the network connection:
"\\server1\colorphotos"
Then user "Judy" (or other users) cannot create the network
connection:
"\\server1\pdffiles"
...the system will reject the action.
Removing network connections:
Manual removal: You remove network connections through the
Folder button > Network > "Remove Network/FTP
Connection".
Automatic removal: If a network connection definition is not stored
(see above) it will be deleted automatically when you shut down
the panel PC.
Stored connections must be removed manually. You may for
example wish to remove a stored network connection that fails at
To Next Page
Loading...
