how do I scan to network folder
djcc-99.htm[28/10/2014 15:47:21]
system startup because the server status or permissions have
changed.
To scan to the network folder
1. Complete the steps above under “To add a network
connection”.
2. Select the Scan tab and make your settings as with any scan-
to-file job.
3. Press the "File destination" button.
4. Press the path up (“..”) button until it disappears meaning you
reached the list’s topmost level which is the list of accessible
drives.
5. Navigate the list until you see your network location i.e. the
Label you entered in step 8 under "to add a network
connection" above.
6. Select the network location.
7. Once connected, you can navigate to a folder under the network
location to select it as the destination.
8. Press OK when you have highlighted the destination folder you
want to use.
To access files on the network folder
1. Complete the steps above under “To add a network
connection”.
2. Press the folder button to open the file manager dialog.
3. Press the path up (“..”) button until it disappears meaning you
reached the list’s topmost level which is the list of accessible
To Next Page
Loading...
