how do I scan to network folder
djcc-99.htm[28/10/2014 15:47:21]
drives.
4. Navigate the list until you see your network location i.e. the
Label you entered in step 8 under "to add a network
connection" above.
5. Select the network location
6. Navigate to the folder under the network location you wish to
access.
7. Press OK when you have highlighted the file you want to open.
How does the Inactivity timeout for a network connection work?
1. When a network connection is added then it is possible to
specify an inactivity timeout for security reasons.
If timeout value is set to 0 (Infinite) then the network
connection will never time out.
See more in: To add/store/remove a network connection
2. The Network Logon dialog below will be displayed if inactivity
period is reached and access to a network connection is
attempted.
3. In the Network Logon dialog you will be able to change User
name, Password or Inactivity timeout value.
NOTE: Password is mandatory and should always be entered to
reestabilsh network connection.
4. Press OK to connect when you have changed credentials or
timeout value.
To Next Page
Loading...
