how do I auto align?
djcc-105.htm[28/10/2014 15:47:34]
you are here: welcome how do I...? automatically align the image
HP Designjet Scanner
how do I...?
the problem is...
alphabetical index
how do I automatically align the image?
For best scanning results, the paper should be correctly orientated
during insertion into the scanner so that it feeds on a straight path.
However, slight deviations can occur when inserting large documents.
These can be fixed electronically during scanning with the Auto
Alignment option selected.
With Auto alignment selected, the application aligns the image during
scanning based on features in the original image.
Auto Alignment can be applied with both Copying (from the Copy tab)
and with Scan-to-file (from the Scan tab).
...how do auto align with copying or with scan-to-file
1. Insert the original into the scanner as evenly as possible.
2. Make all your settings for the job in the Copy tab or the Scan
tab.
3. If you are copying, select:
Copy tab > Settings > Auto align and press OK. Then press the
copy button when ready.
For Scan-to-file select:
Scan tab > Settings > Auto align and press OK. Then press the
scan-to-file button when ready.
The Reset Alignment option
The Reset Alignment button is found next to the Auto align option.
The Reset Alignment button sets the alignment angle (both auto and
manual) to zero (no alignment). It also un-selects the "Auto Align"
option.
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
