1. Disconnect the power cord from the printer.
2. Wait approximately 10 seconds.
3. Reconnect the power cord to the printer.
4. Press the Power button to turn on the printer.
print job was deleted
If the printer's top cover is open for 10 seconds or more, the printer ejects the page and cancels
the current print job. The printer does not cancel any other print jobs in the queue.
Reprint the document.
USB problems
there are conflicting USB cable connections
A printing conflict may arise when the printer and several USB devices are attached to a hub.
There are two methods for solving the conflict:
● Attach the printer's USB cable directly to the computer.
—or—
● If the printer is attached to a hub, do not use other USB devices attached to the hub
while printing.
file:///C|/Projects/Subway/Mac_UG/ug_notprinting_fs.html (4 of 4) [1/17/2002 3:22:50 PM]
To Next Page
Loading...