Selecting a print quality
Follow these steps to select a print quality from the printer software:
1
Open the Print dialog box.
2
Select the Paper Type/Quality panel.
3
Select one of the following settings from the Print Quality drop-down list:
– Use printer default: Print in the Normal mode.
– FastDraft: Print at the fastest printing speed.
– Fast normal: Print more quickly than the Normal mode and at a higher print
quality than FastDraft.
– Normal: Create the best balance between print quality and speed. This is the
appropriate setting for most documents.
– Best: Produce high-quality printing.
– Maximum dpi: Produce the highest quality printing. This setting requires more
time to print than Best and requires a large amount of disk space.
User's Guide 33
To Next Page
Loading...