Chapter 7
Brochures
● Guidelines
● Preparing to print
● Printing borderless brochures
● Printing brochures with borders
Guidelines
● For great results, use HP Brochure and Flyer Paper.
● Do not print borderless documents in ink-backup mode. Always have two print
cartridges installed in the printer.
● Open the file in a software program and assign the brochure size. Ensure that the
size corresponds to the paper size on which you want to print the brochure.
● Do not exceed the In tray capacity: 20 sheets of brochure paper.
Preparing to print
1 Raise the Out tray.
2 Slide the paper guide all the way to the left.
3 Place brochure paper in the In tray, pushing the paper into the printer until it stops.
4 Slide the paper guide firmly against the edge of the paper stack.
5 Lower the Out tray.
Printing borderless brochures
1 Open the Page Setup dialog box.
2 Click the appropriate borderless paper size in the Paper Size list.
3 Click OK.
4 Open the
Print dialog box.
5 Select the Paper Type/Quality panel.
6 In the Paper Type drop-down list, click the appropriate brochure paper.
7 In the Print Quality drop-down list, select Normal, Best, or Maximum dpi.
8 Select any other print settings that you want, and then click Print.
HP Deskjet 5700 Series 42
To Next Page
Loading...