Chapter 7
Greeting cards
● Guidelines
● Preparing to print
● Printing
Guidelines
● Unfold prefolded cards, and then place them in the In tray.
● For great results, use HP Greeting Card Paper.
● Do not exceed the In tray capacity: 20 cards.
Preparing to print
1 Raise the Out tray, and then remove all paper from the In tray.
2 Slide the paper guide all the way to the left.
3 Fan the edges of the greeting cards to separate them, and then align the edges.
4 Place the greeting cards in the In tray, with the side to be printed on facing down.
5 Push the cards into the printer until they stop.
6 Slide the paper guide firmly against the edge of the cards.
7
Printing
1
2
3
4
Lower the Out tray.
Open the Page Setup dialog box, and then select the following settings:
– Paper Size: The appropriate card size
– Orientation: The appropriate orientation
Open the
Print dialog box.
Select the Paper Type/Quality panel, and then specify the following settings:
– Paper Type: The appropriate card type
– Print Quality: Normal, Best, or Maximum dpi
Select any other print settings that you want, and then click Print.
HP Deskjet 5700 Series 44
To Next Page
Loading...