Transparencies
● Guidelines
● Preparing to print
● Printing
Guidelines
● For great results, use HP Premium Inkjet Transparency Film.
● Do not exceed the In tray capacity: 30 transparencies.
Preparing to print
1 Raise the Out tray, and then remove all paper from the In tray.
2 Slide the paper guide all the way to the left.
3 Place the transparencies in the In tray.
The side to be printed on should face down and the adhesive strip should face up
and toward the printer.
4 Carefully push the transparencies into the printer until they stop, so that none of the
adhesive strips catch on one another.
5 Slide the paper guide firmly against the edge of the transparencies.
6 Lower the Out tray.
Printing
1 If necessary, open the Page Setup dialog box and set the paper size, scaling, and
orientation options.
2 Open the
Print dialog box.
3 Select the Paper Type/Quality panel, and then specify the following settings:
– Paper Type: The appropriate transparency type
– Print Quality: Normal or Best
4 Select any other print settings that you want, and then click Print.
User's Guide 47
To Next Page
Loading...